Cart is empty.
Features
- Compatible with MG Series V4.0 (except SP4000) and SP series V4.0 when using an RTX3 V1.5
- Built-in transceiver (433MHz or 868MHz)
- 100db wireless siren with integrated strobe light
- Weather-resistant design using a PC/ABS enclosure with UV protection (-20°C to 50°C / -4°F to 122°F)
- Battery powered only, no need for AC power
- Wireless range in a typical residential environment:
- - 35m (115ft) with MG6160, MG6130;
- - 70m (230ft) with MG5000, MG5050 and RTX3
- Fast alarm response time (4 seconds)
- 2.5 hour alarm display (strobe flashes every 4 seconds after bell cut-off)
- Siren presence supervised by control panel
- Dual tamper protection (cover removal, and removal from wall)
- Assign up to 4 sirens per control panel
- In-field firmware upgradeable via 307USB
- Siren test mode
- 4-LED signal strength and status display
- Strobe lens available in 4 colours (red, blue, amber, and clear)
- Fully powered using three 1.5Vdc type “D” alkaline batteries (included). Not required, but can also be powered using 8-16Vac / 9-20Vdc power supply.
- Dimensions: 24cm x 6cm x 18cm (9.5in x 2.3in x 7 in)
